TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
Few days ago, Raspberry Foundation announced new member of its family, a Rasbperry Pi Compute Module 4. It’s quite obvious, even from the first look, that the new module is very different from its predecessors. Main difference is a new form factor, leaving DDR2 SODIMM in the past.
The same 64-bit quad-core BCM2711 application processor as in Raspberry Pi 4B, the Compute Module 4 brings higher performance: faster CPU cores, better multimedia, more interfacing capabilities, and, for the first time, a choice of RAM densities and a wireless Wi-Fi and Bluetooth connectivity options.
Compute Module 4 comes in 32 variants. Lite, as always, offers no eMMC memory, a and standard versions come with up to 8GB RAM, 32 eMMC Flash and wireless modem.
New features of Compute Module 4
1.5GHz quad-core 64-bit ARM Cortex-A72 CPU as in Raspberry Pi 4 version B
1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
8GB, 16GB or 32GB eMMC Flash storage for Standard version, Lite version without eMMC
Optional 2.4GHz and 5GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0
Single-lane PCI Express 2.0 interface
Gigabit Ethernet PHY with IEEE 1588 support
Dual HDMI interfaces, at resolutions up to 4K
28 GPIO pins, with up to 6 × UART, 6 × I2C and 5 × SPI
https://modberry.techbase.eu/wp-content/uploads/2020/10/modberry500-cm4.png900900adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2021-12-22 09:55:592022-05-10 09:56:20Compute Module 4-based industrial controller available for purchase
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
Few days ago, Raspberry Foundation announced new member of its family, a Rasbperry Pi Compute Module 4. It’s quite obvious, even from the first look, that the new module is very different from its predecessors. Main difference is a new form factor, leaving DDR2 SODIMM in the past.
The same 64-bit quad-core BCM2711 application processor as in Raspberry Pi 4B, the Compute Module 4 brings higher performance: faster CPU cores, better multimedia, more interfacing capabilities, and, for the first time, a choice of RAM densities and a wireless Wi-Fi and Bluetooth connectivity options.
Compute Module 4 comes in 32 variants. Lite, as always, offers no eMMC memory, a and standard versions come with up to 8GB RAM, 32 eMMC Flash and wireless modem.
New features of Compute Module 4
1.5GHz quad-core 64-bit ARM Cortex-A72 CPU as in Raspberry Pi 4 version B
1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
8GB, 16GB or 32GB eMMC Flash storage for Standard version, Lite version without eMMC
Optional 2.4GHz and 5GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0
Single-lane PCI Express 2.0 interface
Gigabit Ethernet PHY with IEEE 1588 support
Dual HDMI interfaces, at resolutions up to 4K
28 GPIO pins, with up to 6 × UART, 6 × I2C and 5 × SPI
https://modberry.techbase.eu/wp-content/uploads/2020/10/modberry500-cm4.png900900adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-12-22 13:27:492020-12-22 13:27:54Compute Module 4-based industrial controller available for purchase
New features of Edge TPU brought to ModBerry series
In October 2020, with the release of the latest Compute Module 4 from Rasbperry Pi Foundation, TECHBASE announced an upgraded device from ModBerry 500 series, called ModBerry 500 CM4. Thanks to the high-performance PCI-Express bus introduced in Compute Module 4 and Raspberry Pi community, the device itself presents support for a wide range of new applications, such as use of Google’s Artificial Intelligence modules at ease.
Therefore, TECHBASE designed a new device, called ModBerry AI GATEWAY 9500-CM4, utilizing the vertical format of ModBerry 9500, latest Compute Module 4 and Google’s Coral TPU. Installation-ready AI GATEWAY allows direct application in industrial fields.
AI GATEWAY with Coral TPU enhancement
Neuron network capabilities enhance CM4-based devices, not only collecting and sending data, but also allows local data change predictions and allows direct management on-site. This feature gives the possibility for various applications, such as data analysing and establishing trends predictions, smart alarms and smart monitoring, local notification control, etc.
Used Edge TPU coprocessor via PCI-Express bus is capable of performing 4 trillion operations per second (TOPS), using 0.5 watts for each TOPS (2 TOPS per watt). Google Coral easily integrates with Raspberry Pi Compute Module in Linux and optionally in Windows with full support of TensorFlow Lite framework and AutoML Vision Edge solution.
AI GATEWAY with available expansion cards
ModBerry AI GATEWAY 9500-CM4 can be equipped with serial RS-232/485 ports, range of digital and analog I/Os, USB, HDMI and Ethernet. Interfaces can be expanded with additional I/Os and opto-isolation, relays, Ethernet, 1-Wire, CAN, M-Bus Master and Slave, accelerometer, OLED screen and many more features like TPM Security Chip, eSIM and SuperCap backup power support.
ModBerry AI GATEWAY 9500-CM4 series also offers a standard PCI module support for various wireless communication protocols, such as:
GSM modem (4G/LTE and fast 5G modem, interchangeable with Coral TPU)
economic NarrowBand-IoT technology
LoRa, ZigBee, Sigfox, Wireless M-Bus
secondary Wi-Fi/Bluetooth interface or Wi-Fi Hi-Power
custom wireless interfaces
ModBerry AI GATEWAY 9500-CM4 availability
First prototypes are being developed, since Compute Module 4 is already available for the purchase. Delivery time for various configurations of AI GATEWAY will be approximately 2 months, depending on the CM4 supply on the market and chosen expansion cards. For more information contact TECHBASE’s Sales Department via email or Live Chat here.
https://modberry.techbase.eu/wp-content/uploads/2020/12/ai_gateway.jpg900900adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-12-03 16:24:162021-02-02 10:46:40AI GATEWAY series with Compute Module 4 and Google Coral TPU
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
Few days ago, Raspberry Foundation announced new member of its family, a Rasbperry Pi Compute Module 4. It’s quite obvious, even from the first look, that the new module is very different from its predecessors. Main difference is a new form factor, leaving DDR2 SODIMM in the past.
The same 64-bit quad-core BCM2711 application processor as in Raspberry Pi 4B, the Compute Module 4 brings higher performance: faster CPU cores, better multimedia, more interfacing capabilities, and, for the first time, a choice of RAM densities and a wireless Wi-Fi and Bluetooth connectivity options.
Compute Module 4 comes in 32 variants. Lite, as always, offers no eMMC memory, a and standard versions come with up to 8GB RAM, 32 eMMC Flash and wireless modem.
New features of Compute Module 4
1.5GHz quad-core 64-bit ARM Cortex-A72 CPU as in Raspberry Pi 4 version B
1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
8GB, 16GB or 32GB eMMC Flash storage for Standard version, Lite version without eMMC
Optional 2.4GHz and 5GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0
Single-lane PCI Express 2.0 interface
Gigabit Ethernet PHY with IEEE 1588 support
Dual HDMI interfaces, at resolutions up to 4K
28 GPIO pins, with up to 6 × UART, 6 × I2C and 5 × SPI
https://modberry.techbase.eu/wp-content/uploads/2020/10/modberry500-cm4.png900900adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-10-23 12:01:142020-12-04 11:02:06ModBerry 500 with Compute Module 4 available for pre-order
UPDATE 22.10.20: ModBerry 500 with Compute Module 4 available for pre-order
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
A day ago, Raspberry Foundation announced new member of its family, a Rasbperry Pi Compute Module 4. It’s quite obvious, even from the first look, that the new module is very different from its predecessors. Main difference is a new form factor, leaving DDR2 SODIMM in the past.
The same 64-bit quad-core BCM2711 application processor as in Raspberry Pi 4B, the Compute Module 4 brings higher performance: faster CPU cores, better multimedia, more interfacing capabilities, and, for the first time, a choice of RAM densities and a wireless Wi-Fi and Bluetooth connectivity options.
Compute Module 4 comes in 32 variants. Lite, as always, offers no eMMC memory, a and standard versions come with up to 8GB RAM, 32 eMMC Flash and wireless modem.
New features of Compute Module 4
1.5GHz quad-core 64-bit ARM Cortex-A72 CPU as in Raspberry Pi 4 version B
1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
8GB, 16GB or 32GB eMMC Flash storage for Standard version, Lite version without eMMC
Optional 2.4GHz and 5GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0
Single-lane PCI Express 2.0 interface
Gigabit Ethernet PHY with IEEE 1588 support
Dual HDMI interfaces, at resolutions up to 4K
28 GPIO pins, with up to 6 × UART, 6 × I2C and 5 × SPI
Few months ago IoT Industrial Devices predicted a possible release date for Compute Module 4 in Standard and Lite version:
First Rasbperry Pi 1B model had it’s analogy in industrial Compute Module 1 after almost 2 years from it’s premiere. Compute Module 2 was probably omitted because the change from RPi1 to RPI2 mainly involved a minor change of the processor (Cortex-A7 900MHz), which was almost immediately replaced with Cortex-A53 1.2GHz in Raspberry Pi 3.
The premiere of Compute Module 3 occured a year after RPI 3 announcement, providing a significant boost of industrial market solutions. Since Raspberry Pi 4 was a great success in 2019, we might see it’s equivalent in industrial series of Raspberry Pi – Compute Module 4. A possible release date of Raspberry Pi’s Compute Module 4 is mid-2020.
Raspberry Pi is gaining recognition in Industry
Almost a year ago, in the beginning of 2019, Raspberry Pi Foundation presented Raspberry Pi Compute Module 3+, a successor to previous CM3 version of development board, aimed at businesses and industrial users. The Compute Module uses a standard DDR2 SODIMM (small outline dual in-line memory module) form factor. GPIO and other I/O functions are routed through the 200 pins on the board.
Only a few months later, in June 2019, came big premiere of Raspberry Pi 4 Model B, the long-awaited successor of customer RPi3+. With new processor, larger RAM options and many input/output changes, became new standard in small, embedded PC world.
It seems a matter of time before the Raspberry Pi Compute Module 3+ will get its own successor, probably called Compute Module 4, a new milestone of professional embedded IoT module. What might be the specification of this highly expected development board?
Industrial use of Compute Module
With Compute Module 3+ options from Raspberry Pi, TECHBASE upgraded their ModBerry 500/9500 industrial computers. From now on the ModBerry 500/9500 can be supported with extended eMMC, up to 32GB. Higher memory volume brings new features available for ModBerry series.
Higher performance of ModBerry 500/9500with extended eMMC flash memory, up to 32GB , powered by quad-core Cortex A53 processor allows the device to smoothly run Windows 10 IoT Core system, opening up many possibilities for data management, remote control and visualisation.
https://modberry.techbase.eu/wp-content/uploads/2020/10/rpi-compute-module-4.jpg18282560adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-10-20 07:43:462020-10-23 12:04:20Raspberry Pi Compute Module 4 premiere a new milestone
UPDATE 22.10.20: ModBerry 500 with Compute Module 4 available for pre-order
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
According to latest leaks about Compute Module 4 specifiaction and features we can be more than sure that:
New Compute Module will feature Wi-Fi and Bluetooth on-board! Raspberry Pi Compute Module series will probably include versions with and without these modems to provide modules for variety of industrial applications.
PCI-Express line will be available externally to enable extension support via PCIe
Ethernet support will be enabled, most probably 1Gbps, since it is a standard in latest Raspberry Pi 4B.
Official Raspberry Pi’s information about upcoming Compute Module 4
In recent interview with Eben Upton, the CEO of Raspberry Pi Trading, we finally had Raspberry Pi Compute Module 4 release confirmation, probably in 2021. He shared some details about the upcoming CM4 features, such as single-lane NVMe support.
The Raspberry Pi Compute Module, CM4, we will support NVMe to some degree on that, because of course, it [Raspberry Pi 4] has a PCI Express channel. (…) We have a single lane Gen 2 which is used to supply USB 3.0 on the Raspberry Pi [4]. On the [Compute] Module that would be exposed to the edge connector and we’re likely to support NVMe over that.
Eben Upton, CEO of Raspberry Pi Trading
Raspberry Pi is gaining recognition in Industry
Almost a year ago, in the beginning of 2019, Raspberry Pi Foundation presented Raspberry Pi Compute Module 3+, a successor to previous CM3 version of development board, aimed at businesses and industrial users. The Compute Module uses a standard DDR2 SODIMM (small outline dual in-line memory module) form factor. GPIO and other I/O functions are routed through the 200 pins on the board.
Only a few months later, in June 2019, came big premiere of Raspberry Pi 4 Model B, the long-awaited successor of customer RPi3+. With new processor, larger RAM options and PCIe/NVMe support, CM4 might be a black horse of industrial automation in 2021.
It seems a matter of time before the Raspberry Pi Compute Module 3+ will get its own successor, called Compute Module 4, a new milestone of professional embedded IoT module. What might be the specification of this highly expected development board?
Raspberry Pi Compute Module 4 probable specification
Compute Module 4 specifications probably will look like these:
1GB, 2GB or 4GB LPDDR4-3200 SDRAM will become a standard options, instead of fixed 1GB LPDDR2 SDRAM,
PCIe/NVMe support via single lane
Current flash memory (eMMC) options: 8GB / 16GB / 32GB from CM3+ will probably stay the same,
weight and factor will stay the same, to provide a possibility to upgrade current IoT applications of CM3 and CM3+
With much higher performance, the new Raspberry Pi Compute Module 4 will, for sure, support Gigabit Ethernet, USB 3.0 expansions with PCIe/NVMe single lane. We might even see wider working temperature range, if Raspberry Pi Foundation decides to make some hardware changes, to follow, for example, ESP32 – used in end-point IoT automation.
Industrial use of Compute Module
With Compute Module 3+ options from Raspberry Pi, TECHBASE upgraded their ModBerry 500/9500 industrial computers. From now on the ModBerry 500/9500 can be supported with extended eMMC, up to 32GB. Higher memory volume brings new features available for ModBerry series. Upcoming Raspberry Pi’s Compute Module 4 will be fully compatible with TECHBASE’s ModBerry 500/9500 controllers, oferring extended features.
Higher performance of ModBerry 500/9500with extended eMMC flash memory, up to 32GB , powered by quad-core Cortex A53 processor allows the device to smoothly run Windows 10 IoT Core system, opening up many possibilities for data management, remote control and visualisation.
https://modberry.techbase.eu/wp-content/uploads/2020/10/compute-module-4.png518800adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-10-15 13:20:352020-10-23 12:04:35New Raspberry Pi Compute Module 4 features confirmed
UPDATE 22.10.20: ModBerry 500, first industrial computer based on Compute Module 4, available for pre-order
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
Update on Raspberry Pi’s Compute Module 4 features [15.10.2020]
According to latest leaks about Compute Module 4 specifiaction and features we can be more than sure that:
New Compute Module will feature Wi-Fi and Bluetooth on-board! Raspberry Pi Compute Module series will probably include versions with and without these modems to provide modules for variety of industrial applications.
PCI-Express line will be available externally to enable extension support via PCIe
Ethernet support will be enabled, most probably 1Gbps, since it is a standard in latest Raspberry Pi 4B.
Official Raspberry Pi’s information about upcoming Compute Module 4
In recent interview with Eben Upton, the CEO of Raspberry Pi Trading, we finally had Raspberry Pi Compute Module 4 release confirmation, probably in 2021. He shared some details about the upcoming CM4 features, such as single-lane NVMe support.
The Raspberry Pi Compute Module, CM4, we will support NVMe to some degree on that, because of course, it [Raspberry Pi 4] has a PCI Express channel. (…) We have a single lane Gen 2 which is used to supply USB 3.0 on the Raspberry Pi [4]. On the [Compute] Module that would be exposed to the edge connector and we’re likely to support NVMe over that.
Eben Upton, CEO of Raspberry Pi Trading
First Rasbperry Pi 1B model had it’s analogy in industrial Compute Module 1 after almost 2 years from it’s premiere. Compute Module 2 was probably omitted because the change from RPi1 to RPI2 mainly involved a minor change of the processor (Cortex-A7 900MHz), which was almost immediately replaced with Cortex-A53 1.2GHz in Raspberry Pi 3.
The premiere of Compute Module 3 occured a year after RPI 3 announcement, providing a significant boost of industrial market solutions. Since Raspberry Pi 4 was a great success in 2019, we might see it’s equivalent in industrial series of Raspberry Pi – Compute Module 4. A possible release date of Raspberry Pi’s Compute Module 4 is somewhere inbetween 2020/2021.
Raspberry Pi is gaining recognition in Industry
Almost a year ago, in the beginning of 2019, Raspberry Pi Foundation presented Raspberry Pi Compute Module 3+, a successor to previous CM3 version of development board, aimed at businesses and industrial users. The Compute Module uses a standard DDR2 SODIMM (small outline dual in-line memory module) form factor. GPIO and other I/O functions are routed through the 200 pins on the board.
Only a few months later, in June 2019, came big premiere of Raspberry Pi 4 Model B, the long-awaited successor of customer RPi3+. With new processor, larger RAM options and PCIe/NVMe support, CM4 might be a black horse of industrial automation in 2021.
It seems a matter of time before the Raspberry Pi Compute Module 3+ will get its own successor, called Compute Module 4, a new milestone of professional embedded IoT module. What might be the specification of this highly expected development board?
Raspberry Pi Compute Module 4 probable specification
Compute Module 4 specifications probably will look like these:
1GB, 2GB or 4GB LPDDR4-3200 SDRAM will become a standard options, instead of fixed 1GB LPDDR2 SDRAM,
PCIe/NVMe support via single lane
Current flash memory (eMMC) options: 8GB / 16GB / 32GB from CM3+ will probably stay the same,
weight and factor will stay the same, to provide a possibility to upgrade current IoT applications of CM3 and CM3+
With much higher performance, the new Raspberry Pi Compute Module 4 will, for sure, support Gigabit Ethernet, USB 3.0 expansions with PCIe/NVMe single lane. We might even see wider working temperature range, if Raspberry Pi Foundation decides to make some hardware changes, to follow, for example, ESP32 – used in end-point IoT automation.
Industrial use of Compute Module
With Compute Module 3+ options from Raspberry Pi, TECHBASE upgraded their ModBerry 500/9500 industrial computers. From now on the ModBerry 500/9500 can be supported with extended eMMC, up to 32GB. Higher memory volume brings new features available for ModBerry series. Upcoming Raspberry Pi’s Compute Module 4 will be fully compatible with TECHBASE’s ModBerry 500/9500 controllers, oferring extended features.
Higher performance of ModBerry 500/9500with extended eMMC flash memory, up to 32GB , powered by quad-core Cortex A53 processor allows the device to smoothly run Windows 10 IoT Core system, opening up many possibilities for data management, remote control and visualisation.
https://modberry.techbase.eu/wp-content/uploads/2020/08/rpi-cm4.png518800adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2020-08-04 09:54:292020-10-24 16:16:43Raspberry Pi Compute Module 4 with PCie/NVMe support next year
UPDATE 22.10.20: ModBerry 500 with Compute Module 4 available for pre-order
TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for pre-orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.
Main features of updated device are:
up to 4x faster eMMC Flash with up to 32GB storage
up to 2x faster performance of CPU apllications than previous CM3 version
up to 8x more RAM (8GB LPDDR4)
optional 1Gbit Ethernet interface
optional PCIe card support for NVMe SSD drive (via M.2)
optional second PCIe support for wireless modem solutions
First orders will be ready with subject to the availability of the CM4 module itself.
Update on Raspberry Pi’s Compute Module 4 features [15.10.2020]
According to latest leaks about Compute Module 4 specifiaction and features we can be more than sure that:
New Compute Module will feature Wi-Fi and Bluetooth on-board! Raspberry Pi Compute Module series will probably include versions with and without these modems to provide modules for variety of industrial applications.
PCI-Express line will be available externally to enable extension support via PCIe
Ethernet support will be enabled, most probably 1Gbps, since it is a standard in latest Raspberry Pi 4B.
and OpenGL ES 3.0 graphics will replace 1.1, 2.0 versions,
weight and factor will stay the same, to provide a possibility to upgrade current IoT applications of CM3 and CM3+
A Lite 4 version of Compute Module is to be expected too, without eMMC and probably limited SDRAM options.
ModBerry, the first Industrial Raspberry Pi application
With Compute Module 3+ options from Raspberry Pi, TECHBASE upgraded our ModBerry 500/9500 industrial computers. From now on the ModBerry 500/9500 can be supported with extended eMMC, up to 32GB. Higher memory volume brings new features available for ModBerry series.
https://modberry.techbase.eu/wp-content/uploads/2019/11/cm4.png518800adminhttps://modberry.techbase.eu/wp-content/uploads/2017/01/modberry_logo.pngadmin2019-11-26 13:52:322020-10-23 12:05:08Raspberry Pi Compute Module 4 coming soon? Check possible specification.
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, you cannot refuse them without impacting how our site functions. You can block or delete them by changing your browser settings and force blocking all cookies on this website.
Other external services
We also use different external services like Google Webfonts, Google Maps and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.