Posts

Latest Raspberry Pi CM4 device with relay expansion

/0 Comments/in , /by

Industrial Computer powered with Raspberry Pi Compute Module 4 which you can easily adapt to your needs. Upgraded ModBerry 500 CM4 series use latest Processor Module, powered by Quad-core Cortex-A72 1.5GHz processor, 1/2/4/8GB LPDDR4 RAM and up to 32GB eMMC on-board.  ModBerry optionally features wide range of additional I/Os, such as Digital and Analog Inputs/Outpus, Serial Ports, Ethernet, CAN and wireless modems.

ExCard modules to peak the performance

Every TECHBASE’s industrial computer is supported by ExCard add-on modules for extra RS-232/485 serial ports, Ethernet ports, PCIe slots, analog input and output, digital I/Os, relays, M-Bus interface, opto-isolation, accelerometer, etc. To provide specific communication paths, ModBerry can be rigged with additional Wi-Fi/Bluetooth module, 3G/LTE, NarrowBand-IoT, LoRa, ZigBee, GPS and Wireless M-Bus.

The latest options for ModBerry series are:

  • SuperCap expansion, to provide constant power supply as a UPS option
  • OLED 0.96” & new OLED 1,3″ screen, allowing the control without the need of connecting into the device
  • ESP32 module as a security chip, to add a firewall into control installation and ensure constant operation of the device, even with power drops and random events
  • Aluminum case, to grant much higher durability for extra harsh industrial conditions
  • M.2 NVMe SSD controller for extra data storage
ModBerry 500 with Raspberry Pi Compute Module 4

ModBerry M500 upgrades to Raspberry Pi 3 B+

/0 Comments/in , , /by

The latest version of Raspberry Pi development board, Raspberry Pi Model 3 B+, is now available as a platform for ModBerry M500 industrial computer series. Raspberry Pi 3 Model B+ (Plus) offers has more computing power and much greater possibilities in the field of wired and wireless communication.

The biggest new feature introduced in 2016 is the Raspberry Pi 3 wireless support. Now the creators took a step forward and refined the solution. The new Raspberry Pi 3 Model B+ – supports two-band Wi-Fi (2.4 GHz and new 5 GHz), Bluetooth version 4.2  and Ethernet over USB 2.0 (up to 300 Mb / s). Upgraded ModBerry M500 series is powered by s more powerful heart, in the form of a Broadcom BCM2837B0 quad-core processor clocked at 1.4 GHz. Power-over-Ethernet support has also appeared, and heat dissipation has been improved.

ModBerry M500 on Raspberry Pi 3 Model B+

ModBerry M500 vs ModBerry 500(CM3)

Standard ModBerry 500 series is based on Raspberry Pi Compute Module 3, an industrial version of commercial Raspberry Pi branch, with flagship Raspberry Pi 3 Model B+. Used Compute Module is more suitable for custom products, such as our ModBerry 500 industrial computer, which can be adapted to customer’s need with wide range of extension modules from TECHBASE. ModBerry equipped with CM3 can be configured to support chosen number of RS-232/485 serial ports, Digital and Analog I/Os, various setup of Ethernet/USB ports, CAN interface, 1-Wire and wireless modems: 3G/LTE, GPRS/EDGE, GPS, LoRa, ZigBee, Wireless M-Bus, NarrowBand-IoT and many more.

The updated M500 availability

Currently the updated M500 samples, are available on demand. Please contact TECHBASE’s sales department via https://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, the development, specific datasheets will be available in mid-June. The pricing of each unit may vary on the basis of configuration and order quota.

ModBerry expands to the latest NanoPi & OrangePi platforms

/0 Comments/in , , , /by

Introduced in November 2017, the ModBerry M300 series, based on NanoPi NEO revolutionised the economic segment of Industrial IoT devices and proved, that automation and monitoring can be done effectively with low expenditure on industrial installations.

Read more: http://linuxgizmos.com/automation-controller-runs-linux-on-a-nanopi-neo-sbc/

https://www.cnx-software.com/2017/11/15/techbase-modberry%E2%80%8B-m300-linux-iot-gateway-%E2%80%8Bis-powered-by-nanopi-neo-board/

To ensure constant development of TECHBASE’s solutions and cutting-edge technology, the NanoPi platform part of ModBerry series is expanded by updated ModBerry M300 N2 product, based on NanoPi NEO2. The new addition features Quad-core Cortex-A53, twice more RAM than previous version of NanoPi NEO and Gigabit Ethernet for fast communication.

For even wider range of communication interfaces and application possibilities, TECHBASE offers now ModBerry M300 N2+ based on the NanoPi NEO Plus2. M300 N2+ is equipped with 8GB eMMC, features more USB ports, Gigabit Ethernet port like M300 N2 and is supported with onboard Wi-Fi/Blutetooth 4.0 to ensure many channels of data management.

ModBerry M300 series can optionally support an external 2.5″ SATA hard disk and 2242 SSD storage units with M.2 interface thanks to onboard JMS567 USB to SATA controller. With extra storage space, data management of specific installations would be more convenient than sending all unprocessed data into cloud or directly to user.

OrangePi capabilities

To meet the Industrial IoT market demands the ModBerry family joined new embedded computer platform, offering adjustable solutions for every industrial installation. ModBerry M300 O1/O2 series is formed by two OrangePi module boards offering different approach to IoT than NanoPi solutions.

ModBerry M300 O1 based on OrangePi Zero Plus features Allwinner H5 (Quad-core Cortex-A53) SoC, moderate 512MB RAM, storage memory option with microSD slot, USB and Gigabit Ethernet port. The wireless communication is supported with onboard Wi-Fi module.

Offering much higher performance and wider feature range, the ModBerry M300 O2 features same SoC as M300 series, but thanks to OrangePi Zero Plus2 means, the device is equipped with onboard 8GB eMMC, extra microSD expansion slot as alternative and wired/wireless interfaces, e.g. HDMI, Wi-Fi, Bluetooth 4.0.

ExCard modules to peak the performance

Every TECHBASE’s industrial computer is supported by ExCard add-on modules for extra RS-232/485 serial ports, Ethernet ports, PCIe slots, analog input and output, digital I/Os, relays, M-Bus interface, opto-isolation, accelerometer, etc. To provide specific communication paths, ModBerry can be rigged with additional Wi-Fi/Bluetooth module, 3G/LTE, NarrowBand-IoT, LoRa, ZigBee, GPS and Wireless M-Bus.

The latest options for ModBerry series are:

  • SuperCap expansion, to provide constant power supply as a UPS option
  • OLED 0.96” & new OLED 1,3″ screen, allowing the control without the need of connecting into the device
  • ESP32 module as a security chip, to add a firewall into control installation and ensure constant operation of the device, even with power drops and random events
  • Aluminum case, to grant much higher durability for extra harsh industrial conditions
  • Mentioned earlier SATA/M.2 SSD controller for extra data storage

The updated M300 availability

Currently all the updated M300 samples, including M300 N2, N2+, O1, O2 are available on demand. Please contact TECHBASE’s sales department via https://modberry.techbase.eu/ contact form with specific requirements to receive an offer that will suit the project’s needs. Since the M300 update is still under the development, specific datasheets will be available in mid-February. The pricing of each unit may vary on the basis of configuration and order quota.

Symbiosis of RaspberryPi and ESP32 in one device

/0 Comments/in , , , /by

The latest configuration of ModBerry 500 device presents the important milestone in TECHBASE’s offer. The introduction of two platform symbiosis, RaspberryPi Compute Module 3 assisted with Espressif’s ESP32 module brings new possibilities of application to life. High performance of CM3, if compromised by exposition to harsh environmental conditions or sudden drop of power, is aided with low-powered ESP32’s real-time system to continue operation of the device. ESP32 module can be battery powered, same as standalone Moduino series, based on similar solution.

ESP32 subsystem for ModBerry 500

Main difference between ESP32-aided ModBerry device and ESP32-based Moduino is that the first one benefits from low-power module aid to prevent errors and downtimes. ESP32 compared to Compute Module 3 works much longer on battery power supply and offers extended sleep modes. Real-time system of ESP32 and simplified communication between ESP32-aided ModBerry device and Moduino controllers drastically shortens the time needed for the system implementation and the cost of maintaining the application. It also enables the use of Espressif’s Wi-Fi-based technology in the ESP-NOW and ESP-MESH networks.

The separate ModBerry-Moduino Ecosystem, working as a separate devices is a solution for scattered object and installations monitoring – with the use of wireless communication interfaces (e.g. LoRa, NarrowBand-IoT, ZigBee, Wi-Fi, Bluetooth, etc.), rather than standard wired networks. For more information ask TECHBASE via one of contact form at: https://modberry.techbase.eu/ & http://moduino.techbase.eu/

Coming soon

TECHBASE plans further development of the product, particularly the issue of remote access to input/output resources and use of ESP32 as a Security Chip – hardware layer protection against hacking (very important issue in current IoT business).

CHOOSE YOUR DEVICE

 

ModBerry brings Compute Module 3 to next level of Industrial IoT

/0 Comments/in , , /by

Introduced with Moduino series, TECHBASE developed further the project of modular aluminum case for their devices. The latest version of housing allows ModBerry to expand in any dimension, supporting additional extension cards (e.g. I/Os, modems, opto-isolation, accelerometer, etc.) and DIN rail mount, that can be retracted into device itself. TECHBASE constantly improves the project to support different platforms (e.g. Raspberry Pi Compute Module 3, NanoPi, ESP32, UpBoard and probably more in the nearest future) and brings them to Industrial IoT world.

Supercapacitor power support for ModBerry

To improve the possibilities of ModBerry devices, TECHBASE added supercapacitor UPS option for ModBerry 500 configurations. Additional power supply available at emergency situations, such as power drop or loss, allows the device to log the recently acquired data and send the notifications to user regarding the occurred event. The supercap support for ModBerry ensures safe system shutdown and protects memory from fragmenting, so there is no need to use diagnostic tools afterwards.

ModBerry enhanced with OLED screen

Just like ESP32-based Moduino series, the ModBerry computers can be now equipped with OLED 0.96″ 128×64 screen via i2c extension protocol. The is small, only about 1″ diameter, but very readable due to the high contrast of an OLED display. Because the display makes its own light, no backlight is required, therefore reduces the power required to run the OLED.

 

CHOOSE YOUR DEVICE

 

LORA MQTT: Perfect Couple – in RaspberryPi & ESP32 Ecosystem

/0 Comments/in , , , /by

TECHBASE Industrial Computers are designed for easy integration of LoRa / MQTT networks. ModBerry devices base on Raspberry Pi / NanoPi / Intel UpBoard platform communicate with both Cloud and Sensor layer (backed with ESP32 Moduino devices) of your installation via MQTT protocol. Gateway utilizes the features of many protocol libraries, such as original TECHBASE’s iMod protocol controller – installable both on the Gateway device itself or externally with wide range of possibilities (industrial computer, hosted server, etc.). Our devices fully support Node-RED, CODESYS, OpenHAB and many more open protocol libraries.

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

iMod M-Bus, Wireless M-Bus, Modbus TCP/RTU, SNMP, MQTT, SMS, E-MAIL, SQL/CSV
CODESYS PROFIBUS, CANopen, EtherCAT, PROFINET, EtherNet/IP
Node-RED, etc. MQTT, bacnet, eISCP
OpenHAB Commercial product integration
Other open-source protocols IEC 61850, IEC 60870-5-104, DLMS/COSEM, KNX, eHz meters, IEC 62056-21, REST

 

CHOOSE YOUR DEVICE

 

New IoT Gateway based on NanoPi Neo

/0 Comments/in /by

In October 2017 TECHBASE introduced newest economical addition to their M-Bus/Modbus Gateway family. Success of ModBerry 500 series based on Compute Module 3 and ModBerry M700 based on NanoPi M2 drove to further development of this efficient platform. TECHBASE proudly presents ModBerry M300 powered by NanoPi NEO.

    • CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    • DDR3 RAM: 512MB
    • Connectivity: 10/100M Ethernet, RS-232, RS-485
    • USB Host: ext. Type-A x1
    • Wireless communication: Wi-Fi, Bluetooth, LoRa, NB-IoT (LTE cat. NB1) /GPRS/EDGE, 3G/GPRS, ZigBee, Sigfox support
    • Working Temperature: -40℃ to 70℃
    • OS/Software: u-boot, UbuntuCore, Debian and Android

Download PDF datasheet: http://www.a2s.pl/products/ModBerry/ModBerry_M300_EN.pdf

Read more

M-Bus/Wireless M-Bus support for Moduino X1/X2

/0 Comments/in /by

Moduino based on ESP32 can now be equipped with TECHBASE’s original mBus10/60/400 converter module. The converter operates as a M-Bus Master and allows user to connect up to 400 standard M-Bus receivers (Slaves) through M-Bus Master output or fewer devices at a higher M-Bus load over long distances. Moduino, as a fully capable Industrial IoT device, can now be used with every device equipped with M-Bus interface, e.g. heat meters, electricity meters, gas meters, executive modules, recorders, measuring instruments.

Wireless M-Bus support

TECHBASE has added high performance module for wireless M-Bus connectivity and multi-hop networking into Moduino series expansion options. The module is configured as an embedded micro system or simple data modem for low power applications in the metering specifically allocated band of 169 MHz or in the ISM band of 868 MHz. The device is can be configured for interoperability in a WMBus network for Industrial IoT applications.

The RF implementation guarantees best-in-class performance in terms of covered area and power consumption. The output power can be increased up to +30 dBm on the 169 MHz band (+27 dBm on optimized version for highest power efficiency) and up to +15 dBm on the 868 MHz band. The extremely reduced power consumption gives access to long lasting battery life requirement (up to 2 μA in sleep mode for wireless M-Bus module with an RTC clock running).

The Moduino devices  can be provided with a W-MBus stack specifically developed by Embit for the platform that allows to integrate the module in the desired system without effort and simplify the interaction in WMBus networks.

MEET MODUINO X

 

First industrial gateways series based on new ESP32 chips

/0 Comments/in /by

The newest addition to TECHBASE’s Industrial IoT Ecosystem is a lightweight, but powerful energy-efficient and fully capable automation controller series, called Moduino – an industrial computer for remote data control and management, equipped with latest ESP32 compute module, wide range of serial, digital and analog inputs/outputs and wireless communication interfaces. This cost effective solution is perfect for end-point devices.

Moduino is powered by ultra-low power Dual-Core Tensilica LX6 240 MHz processor with 512KB RAM (up to 4MB) and 4MB SPI flash memory on-board. Integrated Wi-Fi/BLE modem and extra wireline/wireless interfaces make the Moduino micro-computer a versatile addition to Industrial IoT solutions offered by TECHBASE company. For more complex installations and for those, who need high integration capabilities, the Moduino devices can easily work remotely with existing ModBerry gateway for data accumulation and monitoring, to perform specific actions before sending the data to cloud services. The Moduino-ModBerry installation can work as standalone Ecosystem (for example via MQTT), providing fog-computing to any installation.

READ MORE

Wireless solution

Both Moduino X1 & X2 offer built-in Wi-Fi & Bluetooth 4.2 and support for LoRa, Sigfox, LTE cat. M1, NarrowBand-IoT (LTE cat. NB1) modems. Currently the support of ZigBee modems is under development. Moduino is equipped with standard U.FL (IPEX) external antenna connectors, allowing the device to reach up to 1km range (for Wi-Fi modem) and expanding the range for other wireless interfaces.

Battery and AC powered

Two multi-sized units X1 and X2 represent diversified approach to IIoT installations for remote data access & management. The main difference between Moduino X1 and it’s larger brother Moduino X2, apart from size, is a battery power support for X1 due to lower energy demand, making it independent from local power grid – perfect for remote installations and scattered objects monitoring. Both solutions can be powered by regular power supply with UPS support (LiPo & Supercapacitor batteries), offer wide range of serial, digital and analog inputs/outputs assisted with support of wireless communication interfaces.

Operating systems & software

Use of ESP32-WROVER compute module adds the support for real-time operating systems (compared to most Raspberry Pi based Linux and Windows OS versions), and openness of the Espressif’s platform to Moduino industrial automation controller. Thanks to enormous community of ESP32 and Arduino users and developers, the Moduino can now adapt existing software solutions, tools and programming environments,  for example:

  • ESP-IDF (Espressif IoT Development Framework)
  • Zephyr Project (scalable RTOS)
  • Arduino (C++)
  • MicroPython
  • Mongoose OS
  • etc.

End-point sensors

The Moduino device is a comprehensive end-point controller for variety of sensors located throughout any installation. It fully supports temperature and humidity sensors and new ones are currently developed, e.g. accelerometer, gyroscope, magnetometer, etc.

MEET MODUINO X

 

LoRa & NarrowBand-IoT now available for ModBerry series

/0 Comments/in /by

We proudly announce that ModBerry series devices now supports LoRa and NarrowBand IoT (NB-IoT) modems via extension modules. The new interfaces allows the devices to fully integrate with new networks and systems.

LoRa – Low-Power Wide-Area Network (LPWAN) or Low-Power Network (LPN) is a type of wireless telecommunicationwide area network designed to allow long range communications at a low bit rate among things (connected objects), such as sensors operated on a battery. The low power, low bit rate and intended use distinguish this type of network from a wireless WAN that is designed to connect users or businesses, and carry more data, using more power.

Read more about LoRa

New addition to wide range of communication protocols is NarrowBand IoT:

NarrowBand IoT (NB-IoT) is a Low Power Wide Area Network (LPWAN) radio technology standard developed to enable a wide range of devices and services to be connected using cellular telecommunications bands. NB-IoT is a narrowbandradio technology designed for the Internet of Things (IoT) and is one of a range of Mobile IoT (MIoT) technologies standardized by the 3rd Generation Partnership Project (3GPP). NB-IoT focuses specifically on indoor coverage, low cost, long battery life, and enabling a large number of connected devices.

Read more about NB-IoT

CHOOSE YOUR DEVICE