Posts

ESP32 Serial Port

Arduino ESP32 Serial Port to TCP Converter via WiFi

/0 Comments/in /by

In this class, you will create serial port to TCP converter using Arduino code running on ESP32 processor. We will use one of device which uses such processor: Moduino X ESP32. For TCP communication WiFi module will be used.

You will need:

  • Moduino X2 (may be also X1) ESP32 device (check this website to find out more)
  • PC with Linux operating system
  • socat application
  • RS-232/RS-485 port in your computer or USB to RS-232/RS-485 converter (for programmming and testing)

Introduction

In our example data sent to serial port (which is used as terminal port in regular Micropython ESP32 device) will be send via WiFi using TCP protocol. It also decodes incomming TCP packets and writes them to serial port.Then virtual serial port can be opened for that TCP packets and perform serial communication.We will use socat application for that.

You can read the complete tutorial at Hackster.io:

READ MORE
SIMCom SIM7000G

SIMCom NB-IoT modems now available in Industrial IoT Shop

/0 Comments/in , , /by

TECHBASE’s Industrial IoT devices, ModBerry & Moduino series supports latest SIMCom global-band SIM7000G eMTC & NB-IoT Module. Now the latest SIM7000G as well as 7000E / 7000A versions of modem are available at IIoT-Shop.

SIMCom SIM7000G

Our ModBerry / Moduino devices equipped with latest SIM7000G modem are perfect for industrial automation solutions, e.g. data logging, metering, telemetrics, remote monitoring, security and data management through all Industrial IoT applications.

Supported bandwidths:

    • Global-Band LTE CAT-M1:  B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39;
    • Global-Band LTE CAT NB-IoT1:  B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28;
    • GPRS/EDGE 850/900/1800/1900Mhz Control Via AT Commands

Supported data transfer:

    • LTE CAT-M1(eMTC) – Uplink up to 375kbps, Downlink up to 300kbps
    • NB-IoT – Uplink up to 66kbps, Downlink up to 34kbps
    • EDGE Class – Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
    • GPRS – Uplink up to 85.6Kbps, Downlink up to 85.6Kbps

You can browse wireless modem category here: https://iiot-shop.com/product-category/modems/

UP Board Squared ModBerry M2000

New ModBerry M2000 based on Aaeon’s UP Squared x86 board

/1 Comment/in , , /by

First Industrial IoT device based on UP Board

In 2017, the first unit that entered the ModBerry series was a device called ModBerry M1000, utilizing the capabilities of Aaeon’s UP Board platform. The solution uses Quad-core Intel Atom x5-Z8350 processor with 4x 1.44GHz frequency (boost up to 4x 1.92GHz), up to 4GB RAM and 64GB eMMC on board. The platform also features USB 3.0 and Gigabit Ethernet 10/100/1000Mbps for faster communication and supports various operating systems, e.g.: full distribution of Microsoft Windows 10 Pro/Home/IoT, Microsoft Windows 10 IoT Core, Linux and Android.

To read more about Industrial ModBerry solutions, visit: https://modberry.techbase.eu/

New base platform for Industrial ModBerry device

New addition to TECHBASE’s Industrial IoT Ecosystem is Modberry M2000, powered by Aaeon’s UP Squared development platform, to maximise the performance of Gateway Layer and provide the best data management for end-point layer, built with Industrial Moduino ESP32 devices.

ModBerry M2000 is an industrial computer series designed for the needs of automation, telecommunications, remote supervision and monitoring. ModBerry M2000 comes a choice of processor: Dual-Core Intel N3350 2×2.4GHz or Quad-Core Intel N4200 4×2.5GHz, 2/4/8GB and 16/32/64/128GB eMMC on-board with possibility to expand the storage even further with SATA3 & M.2 slot.

ModBerry M2000 platform can be extended with supported ExCard modules, including physical industrial interfaces: RS-232/485 ports, Digital I/Os, Analog I/Os, Relay, Ethernet, 1-Wire, USB, CAN; and wide range of wireless communication modules: Wi-Fi, Bluetooth GPRS/3G/LTE, for energy-efficient NarrowBand-IoT/LTE cat. M1/NB1, GPS, Wireless M-Bus, LoRa, ZigBee and many more.

ModBerry device and be equipped with dedicated iMod software platform to support standard protocol, such as MQTT, MODBUS, SNMP, M-Bus and many custom protocols. iMod – an innovative software platform allowing for quick start-up and full exploitation of device capabilities without the need for writing programs. A fully configurable system is reflecting typical C-L-V (Convert-Log-Visualize) use. Of course, the PLC software for creation of algorithms in the ladder system with the capability of operation on ModBerry device services the MODBUS protocol is also available.

To order sample devices, visit our new Industrial IoT Shop and ask our Sales Department via chat about new ModBerry M2000: 

BUY NOW

Connection protocols & MQTT data management solutions

/0 Comments/in , , /by

Various data connection protocols & MQTT data management solutions

To take full advantage of the TECHBASE’s Industrial IoT Ecosystem’s capabilities, you can build your own installation, depending on project requirements, choosing from variety of Gateways (Gateway Layer) to control data collected from an array of Moduino edge devices (Sensor Layer). Moduino can be programmed in one of open software platforms, e.g. MicroPython to gather the data and send it, using MQTT standard protocol, further to Gateway and/or cloud service.

Both Moduino ESP32 and Pycom-based Moduino supports open & free libraries, shared by Pycom, tested and approved by constantly growing ESP32/Arduino community. TECHBASE company has plans to provide an open-source platform for managing services & remote configuration and control of endpoint Moduino devices using MicroPython.

MQTT Data Management

Wide range of protocol support

All TECHBASE’s solution can be empowered with iMod software incl. protocol support for industrial interfaces, e.g. M-Bus, Modbus, SNMP, MQTT. iMod software works seamlessly with Node-RED using MQTT protocol, allowing use of bacnet and direct control over devices I/Os with Google’s platform-neutral protobuf – extensible mechanism for serializing structured data and zeroMQ controls to connect the code in any modern language, on any platform. The protocol drivers library can be expanded with CODESYS development system to support PROFIBUS, CANopen, EtherCAT, PROFINET and EtherNet/IP.

BUY NOW
Industrial Moduino ESP32

(SALE) Special configurations of Moduino ESP32

/0 Comments/in , /by

New preconfigured Moduino ESP32 devices

Hurry up for special offer including various configurations of industrial Moduino ESP32 devices. To access SALE prices of Moduino just register to IIoT-Shop and wait for user verification from our Sales Department.

BUY NOW

Moduino is powered by Espressif’s ESP32 module equipped with ultra-low power Dual-Core Tensilica LX6 240 MHz processor with 4MB* pSRAM and 4/8MB SPI flash memory on-board. Integrated Wi-Fi/BLE modem and extra wireline/wireless interfaces make the Moduino micro-computer a versatile addition to Industrial IoT solutions offered by TECHBASE company.

ESP32 Modbus Master TCP

/0 Comments/in /by
Welcome to the series of configuration instructions for ModBerry and Moduino ESP32 devices. In this class, you will program ESP32 processor to be Modbus TCP Master.

We will use two devices, which contain this processor: Moduino ESP32 and Pycom. Both devices are running in MicroPytthon environment. Our Modbus Slave will be PC computer with Modbus simulator software running on it.

You will need:

  • Moduino ESP32 or Moduino Pycom device (check this website to find out more about Moduino ESP32 device and this to check Pycom device)
  • PC with Linux operating system
  • RS-232/RS-485 port in your computer or USB to RS-232/RS-485 converter

You can read the complete tutorial at Instructables.com:

READ MORE

 

Sleep mode and power saving for Raspberry Pi based ModBerry devices

/0 Comments/in , , /by

Sleep functionality for ModBerry/Raspberry Pi devices

TECHBASE company designed new extension module for RaspberryPi-based devices, ModBerry series for better power management in changing conditions of industrial environments. With the use of GPIO the module can manage sleep mode or safe shutdown of device in terms of unexpected drop in the power network.

In last few years developers marketed wide range of ARM-based development boards, lacking in enhanced power management, especially sleep and wake up modes, commonly used in PC-grade computing. These boards are not adjusted for battery power supply, so it’s natural that sleep/wake functions should be implemented. In connection with the development of solutions based on Linux-SBC, key factor is adding sleep modes to any remote installation

With built-in algorithms and the possibility to program on your own, the TECHBASE’s sleep/wake addon module can wake the device using schedule/timer. Another option is wake on external trigger, e.g. change of input, etc. All the options for sleep, shutdown and wake can be configured for various scenarios to ensure constant operation of devices, safety of data and continuity of work in case of power failure in any installation.

The preliminary module for ModBerry devices is available on request and delivery time will be specified by Sales Dept. depending on the size of the project.

Sleep mode with additional power backup

Additional power management option for ModBerry devices is sleep functionality enhanced with SuperCap UPS energy backup device. This solution allows programming scenarios including the execution of chosen actions, in order to save data, send a notification and restart/shutdown the controller after completion.

Advanced power management solution

Most advanced configuration includes use of Moduino ESP32 device for extra logic for wake up / sleep scripts. This addon will allow the RaspberryPi-based ModBerry device to be woken up by Moduino controller via Wi-Fi/GSM/LAN networks.

Moduino-ModBerry symbiosis allows wide range of wake-up/sleep schedule customization, in order to perform best and save energy accordingly to power supply state. Arduino and MicroPython environments provide libraries to control different scenarios of data and power management.

New SuperCap options for Moduino/ModBerry

The SuperCap UPS-SC01 backup power supply is equipped with a highly available backup feature to safely bridge fluctuations, drops or failures accompanying standard 9~30VDC supply voltage and avoid interruption of output voltage in industrial and automation environments. For this purpose SuperCap UPS-SC01 utilizes two supercapacitors (so-called supercaps) as a durable, cycle-resistant and maintenance-free solution for backup energy storage and failure safety.

The UPS-SC01 model is available for purchase at price set to 90€. SuperCap family offers now preliminary and revised models: UPS-SC02 with twice the capacity at 135€ and UPS-SC04 respectively at 180€ with quadrupled capacity of the base device, which can be preordered at our new Industrial IoT Shop, here: https://iiot-shop.com/product/supercap-ups/

BUY NOW

New SIM7000G modem for ModBerry / Moduino Industrial IoT devices

/0 Comments/in , , /by

TECHBASE’s Industrial IoT devices, ModBerry & Moduino series, now supports latest SIMCom global-band SIM7000G eMTC & NB-IoT Module. New SIM7000G supersedes previous 7000E / 7000A / 7000C versions of modem and provides a universal band set with global coverage, in opposite to Europe, America and China-only solutions.

Our ModBerry / Moduino devices equipped with latest SIM7000G modem are perfect for industrial automation solutions, e.g. data logging, metering, telemetrics, remote monitoring, security and data management through all Industrial IoT applications.

Supported bandwidths:

  • Global-Band LTE CAT-M1:  B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28/B39;
  • Global-Band LTE CAT NB-IoT1:  B1/B2/B3/B5/B8/B12/B13/B17/B18/B19/B20/B26/B28;
  • GPRS/EDGE 850/900/1800/1900Mhz Control Via AT Commands

Supported data transfer:

  • LTE CAT-M1(eMTC) – Uplink up to 375kbps, Downlink up to 300kbps
  • NB-IoT – Uplink up to 66kbps, Downlink up to 34kbps
  • EDGE Class – Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
  • GPRS – Uplink up to 85.6Kbps, Downlink up to 85.6Kbps

Our ModBerry / Moduino devices with global-band SIM7000G are available for testing and developing purposes, due to pending certifications of this module. For more information please contact our sales managers via live chat or contact forms.

 

Supported ModBerry series Supported Moduino series

 

SuperCap UPS – Backup power supply for Raspberry Pi / ESP32 IIoT devices

/0 Comments/in , , /by

The new SuperCap UPS-SC01 backup power supply is equipped with a highly available backup feature to safely bridge fluctuations, drops or failures accompanying standard 9~30VDC supply voltage and avoid interruption of output voltage in industrial and automation environments. For this purpose SuperCap UPS-SC01 utilizes two supercapacitors (so-called supercaps) as a durable, cycle-resistant and maintenance-free solution for backup energy storage and failure safety.

As an addition to Industrial IoT family of TECHBASE’s products, such as ModBerry (Raspberry Pi Compute Module 3 powered) industrial gateways and Moduino (ESP32 powered) end-point devices, the SuperCap UPS-SC01 serves well as an additional, highly efficient and fanless power source to allow continuous operation of connected devices in difficult conditions, such as extended industrial temperature range. Perfect solution for a multi-range applications, especially for embedded IIoT / Industry 4.0 systems, where stability and high availability is most important.

PDF Datasheet BUY NOW

Read more