Posts

eSIM support for Rasperry Pi based ModBerry industrial device

/0 Comments/in /by

The embedded SIM card (eSIM) is a form of programmable SIM card that is directly built in the device. eSIM is a global GSMA specification that enables remote SIM delivery to any supported device, and GSMA defines eSIM as the SIM card for the next generation of connected consumer / professional devices and network solution with the use of eSIM technology.

Easy SIM operator swap

In Industrial IoT applications in which there is no need to change the SIM card, the need of using a connector is avoided, which increases reliability and data security. eSIM can be remotely configured – users can add or change operators without having to physically swap the SIM card from the device. It is often a crucial requirement for the installations where factors such as temperature, water and shock resistance, as well as lack of access forces user to choose remote solutions.

eSIM Raspberry Pi Connvectivity

Raspberry Pi & ESP32-based devices

TECHBASE company is now developing eSIM support for Raspberry Pi and ESP32 industrial devices, such as ModBerry and Moduino X to improve the handling of wireless modem connectivity. To receive an offer for ModBerry/Moduino device with eSIM-based modem, contact our Sales Department via e-mail or Live Chat.

BUY ModBerry 500/9500

Moduino X3 ESP32

Economical Moduino X3 with ESP32 on-board available NOW

/0 Comments/in /by

New version of Moduino ESP32, model X3 designed for various economical applications

Moduino X3 model offers new approach to Industrial IoT by upgrading mainboard elements to ensure high performance and ultra-low cost of implementation. In comparison with X2 version, new X3 limits additional ExCard expansion modules, drasticly changing the price of the device, but maintaining the 3-terminal I/Os of previous model. An important change is providing opto-isolation for DIO interface (optionally interchangeable with Relay interface for that I/O).

New version of Moduino ESP32, model X3 is designed for various economical applications, such as Industrial IoT installations, data management & remote edge-devices control. Basic configurations of X3 can be purchased for a price even lower than X1/X2 models for development purposes. Please contact our Sales Department (via Chat or e-mail) to get best price for these devices.

To read more about Industrial Moduino X solution, check here: PDF datasheet

Full comparison below:

Moduino ESP32 Comparison

To order configurable devices, choose Moduino X3 option in Moduino X product configurator here:
https://iiot-shop.com/product/moduino/

ESP32-WROVER-B

Moduino X with ESP32-WROVER-B now available for purchase

/0 Comments/in /by

Upgraded Espressif’s ESP32 module platform for Moduino X

Espressif, a manufacturer of popular ESP32-based IoT solutions, has developed a new version of the ESP32-WROVER module, called ESP32-WROVER-B. Updated module, in addition to the dual-core LX6 microprocessor, has now twice the amount of RAM, compared to previous version of the WROVER module. The ESP32 module can work with Pseudo Static RAM. Up to now, modules with up to 4MB RAM have been the most common. Recently Espressif Systems introduced a new ESP32-WROVER-B module, which is equipped with up to 8MB pSRAM.

ESP32-WROVER-B

The new module is compatible with TECHBASE’s Moduino X series of IIoT devices. The system works with MicoPython, ESP-IDF (freemask based on FreeRTOS with light-weight Internet Protocol), Mongoose OS, Zephyr Project and is Arduino compatible. ESP32-WROVER-B is based on the ESP32-D0WD system with dimensions 5 x 5 mm, which replaced the earlier ESP32-D0WDQ6 (6 x 6 mm). The ESP32-D0WD model has 2 CPU cores that can be controlled independently. The CPU clock frequency can also be configured in the range of 80 to 240 MHz.

Updated Moduino X with ESP32-WROVER-B also comes with variety of Flash Memory available: 4MB and 16MB.

To read more about Industrial Moduino X solution, visit: https://moduino.techbase.eu/

To order sample devices, loor for  ESP32-WROVER-B option in Moduino X product configurator module:

BUY NOW

Moduino ESP32 controller now powered with Pycom modules

/0 Comments/in /by

New base platforms for Moduino device

Revised version of TECHBASE’s Moduino edge controller offers now support and compatibility with wide range of Pycom’s compute modules with built-in communication interfaces, e.g. LoRa, Sigfox, NarrowBand-IoT / LTE cat. M1/NB1 and WiFi/BT4.2, similarly to standard Moduino devices, powered by Espressif’s ESP32-WROVER module.

With new Moduino platform you can choose from variety of Pycom modules to power the unit, in order to receive specific wireless features. At the present day Moduino supports these models:

    • WiPy 3.0 with WiFi & Bluetooth 4.2
    • SiPy with WiFi/BT and Sigfox
    • LoPy4 with WiFi/BT and LoRa, Sigfox
    • GPy with WIFi/BT and NarrowBand-IoT / LTE cat.M1/NB1
    • FiPy with WIFi/BT and LoRa, Sigfox, NarrowBand-IoT / LTE cat.M1/NB1

If physical network connection is a must, you can always choose standard Moduino ESP32 with Ethernet expansion module to ensure communication via LAN. Of course the possibility to choose wired-to-wireless communication is also available with the Moduino configurator.

All Pycom-based Moduino solutions are compatible with wide range of interface expansions for standard Moduino ESP32 platform, e.g. RS-232/485, Analog I/Os, Digital I/Os, Relay, CAN and many more, including SuperCap & OLED screen options. You can find the whole list of available expansions here: https://iiot-shop.com/product/moduino/

To read more about Industrial Moduino X solution, visit: https://moduino.techbase.eu/

BUY NOW

 

ESP32-WROVER-B

Moduino X now with ESP32-WROVER-B support

/0 Comments/in /by

Upgraded Espressif’s ESP32 module platform for Moduino X

Espressif, a manufacturer of popular ESP32-based IoT solutions, has developed a new version of the ESP32-WROVER module, called ESP32-WROVER-B. Updated module, in addition to the dual-core LX6 microprocessor, has now twice the amount of RAM, compared to previous version of the WROVER module. The ESP32 module can work with Pseudo Static RAM. Up to now, modules with up to 4MB RAM have been the most common. Recently Espressif Systems introduced a new ESP32-WROVER-B module, which is equipped with up to 8MB SPI PSRAM.

ESP32-WROVER-B

The new module is compatible with TECHBASE’s Moduino X series of IIoT devices. The system works with MicoPython, ESP-IDF (freemask based on FreeRTOS with light-weight Internet Protocol), Mongoose OS, Zephyr Project and is Arduino compatible. ESP32-WROVER-B is based on the ESP32-D0WD system with dimensions 5 x 5 mm, which replaced the earlier ESP32-D0WDQ6 (6 x 6 mm). The ESP32-D0WD model has 2 CPU cores that can be controlled independently. The CPU clock frequency can also be configured in the range of 80 to 240 MHz.

Updated Moduino X with ESP32-WROVER-B also comes with variety of Flash Memory available: 4MB, 8MB and 16MB.

To read more about Industrial Moduino X solution, visit: https://moduino.techbase.eu/

To order sample devices, visit our new Industrial IoT Shop and ask our Sales Department via chat about new Moduino X with ESP32-WROVER-B module:

BUY NOW