Posts

ModBerry and IoT industry wireless communication using NarrowBand IoT

/0 Comments/in , , /by

Narrowband IoT (NB-IoT) is a revolutionary technology that is changing the way we think about the Internet of Things (IoT). This Low Power Wide Area Network (LPWAN) technology is designed for IoT devices that require low data rates and long battery life. It operates in a licensed spectrum and is optimized for low power consumption, making it ideal for devices that need to run for extended periods of time on small batteries or energy harvesting sources.

One of the most exciting applications of NB-IoT is the use of ModBerry devices. ModBerry is a range of industrial computer devices based on Raspberry Pi or similar computer boards. These devices are equipped with various sensors and communication interfaces that allow them to connect to a wide range of industrial and building automation systems. The combination of NB-IoT and ModBerry devices offers a powerful solution for a wide range of IoT applications.

ModBerry and NarrowBand-IoT applications

Building and facility management is one of the key applications of NB-IoT and ModBerry. These devices can be used to monitor and control various systems in a building, such as heating, ventilation, and air conditioning (HVAC), lighting, and security. The low power consumption of NB-IoT allows the devices to run for extended periods of time on small batteries, making them ideal for use in remote or hard-to-reach locations. This means that building managers can have real-time visibility into the systems that are critical to the operation of their buildings, and can make adjustments as needed to ensure optimal performance.

Industrial automation is another application of NB-IoT and ModBerry. These devices can be used to monitor and control various industrial systems, such as machinery, production lines, and conveyor belts. The low power consumption of NB-IoT allows the devices to run for extended periods of time on small batteries, making them ideal for use in remote or hard-to-reach locations. This means that industrial managers can have real-time visibility into the systems that are critical to the operation of their factories, and can make adjustments as needed to ensure optimal performance.

ModBerry as a Smart City controller

Smart cities is another area where NB-IoT and ModBerry can make a big impact. These devices can be used to monitor and control various systems in a city, such as traffic lights, parking, and environmental sensors. The low power consumption of NB-IoT allows the devices to run for extended periods of time on small batteries, making them ideal for use in remote or hard-to-reach locations.

ModBerry as a low-cost NB-IoT controller

The combination of NB-IoT and ModBerry devices provides a powerful solution for a wide range of IoT applications. With NB-IoT’s low power consumption and long battery life, combined with ModBerry’s flexibility and functionality, they’re ideal for a wide range of IoT applications such as building and facility management, industrial automation, and smart cities. Seeing how these technologies will evolve and improve in the future, and how they will impact our lives, is exciting.

Order now: https://www.industrial-devices.com/industrial-computers/1-46-mod-500.html

Modbus protocol handled by ModBerry IoT device

/0 Comments/in , , /by

Modbus is a communication protocol that is widely used in industrial automation systems. It was developed by Modicon (now Schneider Electric) in 1979 and is used to connect different devices and control systems in a network. Modbus is based on a master-slave architecture, where one device acts as the master and the other devices act as slaves. The master device sends requests to the slaves and the slaves respond with the requested information.

ModBerry is a device that uses the Modbus protocol to communicate with other devices in a network. It is a small computer that is based on the Raspberry Pi platform and it is designed to be used in industrial automation systems. The ModBerry device can be used as a master or a slave in a Modbus network and it can be used to connect different devices such as sensors, actuators, and controllers.

ModBerry advantages in the IoT market

One of the main advantages of using ModBerry is that it is a low-cost solution for industrial automation systems. It is also easy to use and it can be programmed using different languages such as Python, C++, and Java. Additionally, the ModBerry device is small and compact, which makes it easy to install in different environments. It also has a wide range of input and output options, such as digital inputs, digital outputs, analog inputs, and analog outputs, which makes it suitable for a variety of applications.

ModBerry can be used in various industrial applications such as building automation, energy management, and process control. For example, it can be used to monitor and control the temperature, humidity, and lighting in a building. In energy management, it can be used to monitor and control the consumption of electricity, gas, and water. In process control, it can be used to monitor and control the production process in a factory.

ModBerry hardware modularity

Another advantage of ModBerry is its flexibility and scalability. It can be easily integrated with other systems and devices, such as SCADA systems, PLCs, and IoT devices. This allows for a seamless integration of different systems and devices in a single network, which improves efficiency and reduces the complexity of the system.

ModBerry as a low-cost Modbus controller

In conclusion, Modbus is a widely used communication protocol in industrial automation systems and ModBerry is a low-cost, easy-to-use device that utilizes the Modbus protocol. It offers a wide range of input and output options and can be used in various industrial applications. Its flexibility and scalability make it a great solution for integrating different systems and devices in a single network.

Order now: https://www.industrial-devices.com/industrial-computers/1-46-mod-500.html

Raspberry Pi Compute Module 4 in Industrial IoT

/0 Comments/in , , /by

ModBerry 500 CM4 an ultimate solution for IoT monitoring

TECHBASE’s ModBerry industrial computer series has received an update to Compute Module 4 and is available for orders. TECHBASE is leading manufacturer of Industrial Raspberry Pi and Industrial Compute Module solutions. ModBerry 500 series is fully compatible with all releases of Compute Module from Rasbperry Pi foundation.

Industrial Raspberry Pi CM4

Main features of updated device are:

  • up to 4x faster eMMC Flash with up to 32GB storage
  • up to 2x faster performance of CPU appllications than previous CM3 version
  • up to 8x more RAM (8GB LPDDR4-3200)
  • 1Gbit Ethernet interface
  • PCI 2.0 card support for NVMe SSD drive (via M.2)
  • two PCIe support for wireless modem solutions, i.e. LTE/5G modems
Order ModBerry 500 CM4 NOW!

New features of Compute Module 4

  • 1.5GHz quad-core 64-bit ARM Cortex-A72 CPU as in Raspberry Pi 4 version B
  • 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
  • 8GB, 16GB or 32GB eMMC Flash storage for Standard version, Lite version without eMMC
  • Optional 2.4GHz and 5GHz IEEE 802.11b/g/n/ac wireless LAN and Bluetooth 5.0
  • Single-lane PCI Express 2.0 interface
  • Gigabit Ethernet PHY with IEEE 1588 support
  • Dual HDMI interfaces, at resolutions up to 4K
  • 28 GPIO pins, with up to 6 × UART, 6 × I2C and 5 × SPI

Source: https://www.raspberrypi.org/blog/raspberry-pi-compute-module-4/

Raspberry Pi Compute Module 4 vs Radxa RK3568 in Industrial IoT

Radxa, in collaboration with Rockchip’s Toybrick division, began sampling the new community-supported SBC built around Rockchip RK3568 with NPU. ROCK 3A is basically a little brother of ROCK Pi 4, with some improvements from the experience on ROCK Pi 4, the main features are:

  • RK3568 based, Quad A55 up to 2GHz, Mali G52 GPU, 0.8T NPU
  • pluggable eMMC module, 2/4/8GB LPDDR4 3200MT/s, dram controller frequency up to 1560MHz
  • QC/PD power support, with a new generation QC/PD protocol IC
  • Two USB2 same as ROCK Pi 4, two USB3(1x OTG+1x HOST), the two USB3 can be configured in SATA mode with a SATA breakout cable
  • GbE with PoE support
  • M.2 M key for NVMe with PCIe 3.0 x2 lanes
  • M.2 E key for connectivity with PCIe 2.0 x1/SDIO/UART, support WiFi 6 cards
  • 1x MIPI DSI, 1x MIPI CSI, compatible with ROCK Pi 4
  • 40P GPIO mostly compatible with ROCK Pi 4

Source: https://forum.radxa.com/t/new-rock-3a-brought-to-you-by-radxa-and-rockchip/6800

ROCK 3A will run Debian 10, maintained by the Toybrick team. Other community distributions will also be supported too. Early samples(few) for developers are ready. A larger batch will be available in late August 2021. As for an alternative, Raspberry Pi Compute Module 4 based devices are ready for orders.

ModBerry M500 series with SSD/M.2 support and next level configurability

/0 Comments/in , /by

In 2017, TECHBASE Group introduced an industrial-grade automation controller, based on popular Raspberry Pi 3 board. The device called ModBerry M500 incorporated latest Raspberry Pi SBC and TECHBASE’s standard industrial board to enhance the capabilities of market RPi3.

ModBerry M500 added wide range of I/Os to the board, including RS232/485 serial ports, digital and analog I/Os, 10/100Mbps Ethernet port, USB, 1-Wire and optional CAN. ModBerry series also offers additional wired interfaces and wireless communication modules with their proprietary modules called ExCard. The range of wireless modules include 3G/LTE, NarrowBand-IoT (NB-IoT), Wireless M-Bus, ZigBee, LoRa, Sigfox, Wi-Fi, Bluetooth and many more.

Rasbperry Pi 4 upgrade of ModBerry M500

In 2019, with the premiere of Raspberry Pi 4, TECHBASE upgraded their ModBerry M500 device with the latest revision of this popular SBC, further enhancing the performance of their device. New 1.5GHz quad-core 64-bit ARM Cortex-A72 processor (approximately 3 times better performance than previous Cortex-A53 powering Raspberry Pi 3+ Model B and Compute Module 3 and 3+). ModBerry M500 can now be configured from 2GB / 4GB LPDDR4 SDRAM options.

Revised ModBerry M500 features Gigabit Ethernet, USB3.0, two microHDMI ports supporting OpenGL ES 3.x and 4Kp60 hardware decode of HEVC video. The device is fully compatible with previous versions of Rasbperry Pi based Industrial IoT devices and accessories from TECHBASE.

M.2 SSD support for ModBerry M500

Latest software update for Raspberrry Pi 4, now available in beta, makes it possible to boot directly from USB 3.0 connected drive, without the need for an SD card. With a possibility to run the OS directly from SSD is a massive breakthrough, allowing users to improve the performance of the system and data access speed.

ModBerry M500 offers now a feature to include M.2 SSD drive in industrial-grade device. The merge of industrial interfaces and SSD-boosted Raspberry Pi 4 is a perfect solution for on-site data management and gateway application.

ModBerry M500 roadmap for 2020+

Difficult times of coronavirus outbreak in early 2020 changed the expectations for new Industrial IoT devices. Slowed market needed some adjustments to overly expanded devices with reserve of not quite necessary features for different applications – often raising the price of the device.

New addition to ModBerry M series and Industrial IoT Ecosystem offered by TECHBASE Group is the revised ModBerry M500 Lite device, to ensure the full configurability of device’s resources.

ModBerry M500 Lite features:

  • Quad-core ARM Cortex-A72 1.5GHz processor
  • 2/4GB and new 8GB LPDDR4 RAM option
  • SSD M.2 support for mass storage boot
  • Industrial-grade enclosure with DIN-rail mount
  • RTC

ModBerry M500 Lite optional resources:

  • Serial RS232/422/485 ports
  • Digital and Analog I/Os
  • Relays
  • 10/100Mbps Ethernet
  • CAN, 1-Wire
  • M-Bus Master / Slave
  • TPM Security chip
  • OLED 0.96” screen
  • SuperCap UPS

New ModBerry M500 Lite not only is a versatile device with wide array of available optional resources, but also incredible fast with quad 1.5GHz processor, up to 8GB RAM and last but not least, M.2 SSD bootable drive for system, applications and rapid data availability, without the need to bootstrap an SD card. RTC with watchdog option and additional TPM Security chip ensures data safety and breach protection.

Pricing and availability of ModBerry M500 Lite

Price of the device is yet to be specified, but it will be significantly lower than standard ModBerry M500, which can be configured here. Preliminary devices are available to order – please contact our sales department via contact form or Live Chat at https://iiot-shop.com/ to receive a quotation for the configuration needed.